The Series 2100 AutoDrill is based on the 2000 Series unit with the addition of a plunger-style HydroSpeed feed cylinder. This addition overcomes the limitation of simple pneumatic feed control. The two-speed feed rate is standard. The HydroSpeed (sometimes called Hydra-Brake) controls the critical work penetration feed rate and breakthrough process. Check out our videos section for examples of a HydroSpeed in use.
The HydroSpeed can be provided in multiple locations. This flexibility is appreciated when drilling closely spaced holes or on special projects where flexibility is critical. It also simplifies maintenance since it can be repositioned or replaced without disturbing the body of the drill.
The 2100 Series AutoDrill’s features are:
- Self-feeding drill capabilities
- Two-speed stroke control
- Infinitely variable drill feed control
- Cleaner hole breakthrough where less or no burr is desired
- Self-feeding reaming, deburring, and countersinking/small counterbore capabilities
- Can receive and drive multiple drill spindle attachments
- Thrust forces to 500 lbs. on shop air
- Multiple motor drive options available to suit the application
- Spindles speeds from 80 to 6,000 RPM
- Spindle stroke from minimum to 9.000″
- Feed control for up to 6.000″
- Custom configurations for close C-C drilling
- Built-in precision depth control
- All position mounting options
- Standard Key-Type Chuck
- Precision ER Style Collet Chuck (ER8, ER11, ER16, ER20, ER25 and ER32 with some offerings having ER40 and ER50)
- Custom spindles available for your special tooling
- Electric or Air Motor drive options up to 2 HP
- Improved counter-bore and countersink finishes
- Extended capacity with the precision feed control
- Optional SkipFeed for multi-wall tube and extrusion drilling
- Optional PeckFeed for deeper hole drilling processes
There are several advantages of an industrial drill over a hand drill, among them:
Accuracy: they are much more accurate. They can drill a perfectly aligned hole at the precise angle needed. Using a hand drill for such a task could easily turn into a failed attempt, even by a professional.
Speed: if our job is to drill several holes, for example, on a wooden or metal plate, an automatic drill not only performs the task faster but is also simpler. This is because the movement of the chuck and spindle is performed automatically by air pressure.
Power: a handheld drill has very limited power, while an automatic drill has a variable speed that allows better control for the user.
Accuracy: they can drill a hole to the precise depth and at the precise angle, as the angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and repeatably.
Safety: a hand drill can easily slip into the user’s hand. In contrast, an industrial drill provides more stability for the workpiece, as the table allows a vise or clamp to firmly locate and tighten the workpiece, making the operation much safer.
It is no coincidence, then, that such a useful tool has been around for several years and in fact was, like other presses, one of the first machines to be invented.
AutoDrill is your one-stop-shop for drilling, tapping, and other metalworking equipment. Automation helps both the company that is struggling to survive and the one that is thriving to become more efficient with their time and resources. Here are some of the basic products we offer: automated drills, multi-drill heads, drill press tapping equipment, production tapping equipment, pneumatic controls, basic application, and engineering assistance.
You can contact us through our phone number 1-800-871-5022